- Ice Pack for added cooling effect
- 4-Way airflow with auto vertical louver and manual horizontal louver
- High efficiency 1/3 HP motor quiet fan operation
- Manual fill and garden hose attachment with float valve auto shut-off
- 3-Sided high efficiency rigid media pads
- Ideal for indoor and outdoor spaces up to 1300 sqft
-
-
One-step solution. The Jarvis Series SCW 2.4/25 G is a complete solution for quick, streak-free cleaning of business entrances, parking lots, tennis courts, pool decks and sidewalks. This easy to use cold water surface cleaner pressure washer is an all-in-one unit with the pump and Honda® GX engine attached to the surface cleaner, and it is designed to attack the superficial dirt sweeping alone does not get. The Jarvis series surface cleaner pressure washer is perfect for all operators - simple on/off operation, flat-free tires, and a folding handle for easy transport and storage.
-
Operational Features: 1,730 RPM / 1.5 HP Electric Motor Runs on 15 Amps Direct Drive to the Plate Automatically Adjusting Shroud Removable Shroud Sections Water Connection for Wet Grinding Foldable Handle for Easy Transportation Adjustable Wheels for Level Grinding Vacuum Port
-
Product Specs Model #: VSCD-1 Rated Voltage: 120V AMPS: 15 Rated Frequency: 50/60HZ Rated Input Power: 2000W No-Load Speed: RPM: 0-1950 r/min Weight: 6.5kg (14.33 lbs).
-
Door Jamb Saw Used for cutting door jambs and floor molding for instalation of thick floor tile. Please contact us for current pricing and availability.
-
Blades 14 x 3/16 x 1D Abrasive Cut Off Wheels-Concrete Please contact us for current pricing and availability.
-
Griding blocks used with our gasoline powered concrete grinder. Comes in a variety of grits. Please contact us for current pricing and availability.
-
Blocks Floor Grinding 2x2x4 10-grit Please contact us for current pricing and availability.
-
Designed for the compaction of asphalt as well as granular and mixed materials with some cohesive content in confined areas such as parking lots, highway and bridge construction, next to structures, curbs and abutments. Large capacity polyethylene water tank located within the front lift cage for protection and is semi-transparent for easy check of the water level. Large in-tank water filter • Operating weight 203 lbs. • Plate width 19.5" • 5.5 HP • Centrifugal force 3375 lbs. • Frequency 6000 VPM • Speed 100 ft/min • Ft²/h 9750 Please contact us for current pricing and availability.
-
19" aeration width with free-wheeling tines for easy turns. Aerates 21,900 sq ft/hr. Folding handle and 2 removable weights 19" Aerator, Honda GX120, 3.5HP Please contact us for current pricing and availability.
-
Dry areas quickly with this compact, three-speed blower. Quickly dry carpet, hard floors, fresh paint, concrete sealer and much more. Ensure durability and many years of use with this blower's rotationally-molded body Blower - Three-speed Air Mover 1/2 Horsepower, Three speeds, Stackable, Rotomolded durability. ETL US/C Please contact us for current pricing and availability.
-
This bull float is made from lightweight magnesium, and is used to level and smooth the surface prior to finishing. Magnesium floats provide a smoother finish than wood floats • Extruded from magnesium alloy • Lightweight Please contact us for current pricing and availability.
-
Mix, Till, and Dig with Maxim's Commercial Compact Tiller. With Maxim's smallest serviceable roller chain and sprocket transmission, the tines (approximately 150 rpm) can really throw dirt. The commercial compact boasts these great features: Braced, 14 gauge, seamless tubular steel handles, 13" and 19" tilling width, 11" Bolo tines with bolt on blades, and lift handle/engine guard Please contact us for current pricing and availability.
-
Sheets QuickSand 12 x 18 20-grit Please contact us for current pricing and availability.
-
Rubber tire loader - Skid Steer - allows you to use loader bucket, pallet forks and hydraulic concrete breaker. • 61 HP • 5965 lbs Please contact us for current pricing and availability.
-
Sheets QuickSand 12 x 18 36-grit Please contact us for current pricing and availability.
-
Rubber tire loader - Skid Steer - allows you to use loader bucket, pallet forks and hydraulic concrete breaker. • 49 HP • 6290 lbs Please contact us for current pricing and availability.
-
Rubber track loader - allows you to use loader bucket, pallet forks and hydraulic concrete breaker • 66 HP • 7283 lbs Please contact us for current pricing and availability.
-
Sheets QuickSand 12 x 18 60-grit Please contact us for current pricing and availability.
-
Sheets QuickSand 12 x 18 80-grit Please contact us for current pricing and availability.
-
Mini Track Loader • 20 HP • 2580 lbs Please contact us for current pricing and availability.
-
walk behind Mini Track Loader. attachment- tiller attachment, pallet forks, auger and loader bucket. unit come with it's own trailer. 2" ball required • 25 HP • 2610 lbs Please contact us for current pricing and availability.
-
Sheets QuickSand 12 x 18 100-grit Please contact us for current pricing and availability.
-
14" Metal Cutting Chop saw used for cutting any ferrous metals such as rebar, steel studs, pipe, threaded rod, angle iron, etc • Powerful 15.0 Amp/5.5 HP (maximum motor HP) motor provides more overload capacity, increasing performance and durability. • QUIK-CHANGE™ Blade Change System increases productivity by providing the user the ability to change wheels without a wrench. • Exclusive QUIK-FENCE™ tool-free, 45° adjustable fence allows for fast and accurate angle cuts without using a wrench. • Quick-Lock Vise allows for fast clamping on different size materials to increase productivity. • Soft start extends gear and motor life by reducing start up torque. • Large cutting capacity (5" round / 4-1/2" x 6-1/2" rectangle) provides the ability to cut a wide variety of materials Please contact us for current pricing and availability.
-
Discs Abrasive Mesh Screen 17 60-grit Please contact us for current pricing and availability.
-
Roof Pro 455XP Coil Roofing Nailer Please contact us for current pricing and availability.
-
8" drum sander with an expandable drum. Removable handle and dust shoot makes for easy transportation. Drum lowering handle keeps the unit on a steady three point stance and delivers smooth cutting to the floor. This sander can be hooked into a tank vacuum Please contact us for current pricing and availability.
-
Discs Abrasive Mesh Screen 17 100-grit Please contact us for current pricing and availability.
-
7" edge sander. Complete with carrying case and paper changing tool. Aggressive, professional results Please contact us for current pricing and availability
-
Discs Abrasive Mesh Screen 17 150-grit Please contact us for current pricing and availability.
-
Sheet Abrasive Mesh Screen 12 x 18 80-grit Please contact us for current pricing and availability.
-
Built for high torque applications like grinding on concrete floors or sanding wood floors. Use with 17" green scrubbing pads to clean VCT, linoleum, Tile, and brick floors. Please contact us for current pricing and availability.
-
Sheet Abrasive Mesh Screen 12 x 18 100-grit Please contact us for current pricing and availability.
-
Stomper XH670 lightweight rammer with an impact force of 2650 lbs. Lightweight, smooth running and easy to operate Stone Stompers deliver maximum impact force, superior handling, control and reliability. Ideal for compaction of small trenches, utility and piping work, along abatements and walls. * Powered by Honda GX100 with a float carburetor * Shoe size 10" x 13" * Impact force 2650 lbs. * Max. blows/min 727. * Specially-designed carburetor for the 4-cycle models allows the Stomper to be laid down and picked up and keep on running. * Select from either a float or diaphragm carburetor depending on operating preference. * Precision components including forged pistons and solid snubbers provide extra reliability and durability. * Exclusive modular design cuts service time in half. * Quadruple fuel filtration system reduces job site fuel contamination for more run time and longer life. * Dual stage, top mounted air filtration system provides optimum air flow to reduce engine wear and extend life. * An innovative, snap-on contoured hood delivers a dynamic sound absorbing system. * Convenient lifting handles and optional wheels that attach to the handle provide easier mobility in or out of truck beds. Please contact us for current pricing and availability.
-
Sheet Abrasive Mesh Screen 12 x 18 150-grit Please contact us for current pricing and availability.
-
CF36L Lightweight 36" Power Trowel allows you to get on green concrete sooner. Stone Smooth Operator Power Trowels offer precision handling for the professional concrete finisher and include patented features not available on any other brand. * Powered by Honda GX240 * 4 Blade with combination blades * Positive blade positioning, infinitely variable blade leveler * Contoured adjustable handle. * Lightweight Edger Trowel with a cast aluminum rotating edger ring that allows the trowel to run along walls without scuffing or gouging. * Dynamically balanced with a low center of gravity provides stability and smooth operation. * Patented Dyna-Clutch® safety feature stops blade rotation independent of the engine for safe operation. * * Adjustable body contoured handle with cushioned hand grips provide comfort and control for any operator. * Comes assembled and balanced from the factory. Please contact us for current pricing and availability.
-
Pads Green Scrub 13x1 Please contact us for current pricing and availability.
-
CF364 36" Power Trowel offers precision handling for the professional concrete finisher and include patented features not available on any other brand. * Powered by Honda GX240 * 4 Blade with combination blades * Positive blade positioning, infinitely variable blade leveler * Contoured adjustable handle. * Lightweight Edger Trowel with a cast aluminum rotating edger ring that allows the trowel to run along walls without scuffing or gouging. * Dynamically balanced with a low center of gravity provides stability and smooth operation. * Patented Dyna-Clutch® safety feature stops blade rotation independent of the engine for safe operation. * * Adjustable body contoured handle with cushioned hand grips provide comfort and control for any operator. * Comes assembled and balanced from the factory. Please contact us for current pricing and availability.
-
Pads White Polish 13 x 1 Please contact us for current pricing and availability.
-
CF464 46" Power Trowel offers precision handling for the professional concrete finisher and include patented features not available on any other brand. * Powered by Honda GX240 * 4 Blade with combination blades * Positive blade positioning, infinitely variable blade leveler * Contoured adjustable handle. * Lightweight Edger Trowel with a cast aluminum rotating edger ring that allows the trowel to run along walls without scuffing or gouging. * Dynamically balanced with a low center of gravity provides stability and smooth operation. * Patented Dyna-Clutch® safety feature stops blade rotation independent of the engine for safe operation. * * Adjustable body contoured handle with cushioned hand grips provide comfort and control for any operator. * Comes assembled and balanced from the factory. Please contact us for current pricing and availability.
-
Pads Red Buffer 17 x 1 Please contact us for current pricing and availability.
-
Pads Black Stripper 17 x 1 Please contact us for current pricing and availability.
-
General purpose water suction hose for contractors, industrial, and agricultural service. Black smooth EPDM blend rubber tube, fabric plies, and steel wire spiral for full vacuum service. Temperature range: -10°F to 180°F. W/P 125# Please contact us for current pricing and availability.
-
General purpose water suction hose for contractors, industrial, and agricultural service. Black smooth EPDM blend rubber tube, fabric plies, and steel wire spiral for full vacuum service. Temperature range: -10°F to 180°F. W/P 125# Please contact us for current pricing and availability.
-
Pads Green Scrub 17x1 Please contact us for current pricing and availability.
-
Pads White Polish 17x1 Please contact us for current pricing and availability.
-
Pads Black Stripper 12x18x1 Please contact us for current pricing and availability.
-
Pads Green Scrubber 12x18x1 Please contact us for current pricing and availability.
-
Pads White Polish 12x18x1 Please contact us for current pricing and availability.
-
Bobcat Grapple Attachment
Please contact us for current pricing and availability.
-
Blades 12 x 1/8 x 1 Abrasive Cut Off Wheels-Concrete Please contact us for current pricing and availability.
-
Bobcat Auger Attachment earth drill 6", 8", 10", 12", 18", and 24" diameter x 36" deep without extension. with 4' long extension you can drill 7' deep Please contact us for current pricing and availability.
-
For use with handheld concrete saws.
- Virgina Abrasives Blades 14 x 1/8 x 1 Abrasive Cut Off Wheels-Concrete.
-
Clean large surfaces faster and easier than with a standard cleaning nozzle. The Mi-T-M rotary surface cleaners are equipped with strong-bristled brushes for long life and easy glide control. This cleaning accessory can be used on decks, patios, sidewalks, driveways, pool decks, parking lots and any other horizontal surface.*20-inch diameter *4000-PSI rated *Professional-grade high pressure trigger gun *180°F maximum temperature. pressure washer not included
Please contact us for current pricing and availability.
-
Welder/Generator
Please contact us for current pricing and availability.
-
14" Abrasive blade used for cutting metal. For use with handheld saws.
- Virgina Abrasives Blades 14 x 1/8 x 1 Abrasive Cut Off Wheels-Metal
-
Blades 14 x 3/32 x 1 Abrasive Chop Saw Wheels-Metal Please contact us for current pricing and availability.
-
10'6" aluminum siding brake • Used by both professional and DIY customers to bend flat metal into profiles used in roofing and siding of residential and commercial construction • Mark I & II series brakes have a 14” throat depth and are capable of bending & hemming .019-.032 aluminum as well as 16 oz copper, 29 ga.-32 ga. steel • These brakes also work with any of our accessories and are a must for anyone working with aluminum, vinyl siding, and roofing Please contact us for current pricing and availability.
-
Sheets General Purpose VA8 Clarke 8x19-1/2 12-grit Please contact us for current pricing and availability.
-
Sheets General Purpose VA8 Clarke 8x19-1/2 16-grit Please contact us for current pricing and availability.
-
Sheets General Purpose VA8 Clarke 8x19-1/2 36-grit Please contact us for current pricing and availability.
-
Walk Behind Stump Grinder
Please contact us for current pricing and availability.
-
Manual Pipe Threader 1/4" NPT - 2" NPT Threads. Please contact us for current pricing and availability.
-
Sheets General Purpose VA8 Clarke 8x19-1/2 60-grit Please contact us for current pricing and availability.
-
Desa 110,000 BTU Kerosene/Diesel fan forced heat Please contact us for current pricing and availability.
-
Tri-Pod chain lock pipe vice up to 4" pipe
Please contact us for current pricing and availability.
-
Sheets General Purpose VA8 Clarke 8x19-1/2 80-grit Please contact us for current pricing and availability.
-
Bobcat fork attachment Pallet fork attachment Please contact us for current pricing and availability.
-
Vibratorty Plate Vibratory Plate Packer Please contact us for current pricing and availability.
-
Ridgid Cutter/Threader Ridgid 535 Pipe Threader from 1/4" NPT to 2" NPT Please contact us for current pricing and availability.
-
Sheets General Purpose VA8 Clarke 8x19-1/2 100-grit Please contact us for current pricing and availability.
-
Sidewalk EdgerJohn Deere sidewalk edger
Please contact us for current pricing and availability.
-
Discs 6-7/8xNH E-Z Edger Floor Sanding Discs General Purpose 20-grit Please contact us for current pricing and availability.
-
Edco Air Floor ScraperEdco Air Floor Scraper
Please contact us for current pricing and availability.
-
The Ground Hog HD99 is a Towable Hydraulic Earthdrill that is designed to be powerful, easy to use and require very little maintenance. The HD99 is the most powerful earthdrill in the Ground Hog line. With it's 9hp Honda or Subaru engine, the HD99 can easily dig with any Ground Hog auger up to 18 inches in diameter. The use of hydraulics allows the HD99 to have variable auger speed and reverse which is very useful if the auger gets stuck. Ground Hog Walk Behind Auger drills 2", 4", 6", 8", 12", and 18" Holes The HD99 is designed to take the load off of the operator by being almost perfectly balanced with an 8-inch auger attached, and the right angle design eliminates torque to the operator. There are also 3 handlebar positions that allow for normal drilling, as well as close up drilling next to an obstacle such as a wall or fence. The drilling head also pivots from side to side for drilling on uneven terrain. Large highway rated tires make the HD99 easy to maneuver around the job site and there is a locking mechanism on the digging head that allows the auger to be held up and out of the way for moving the machine around the job without having to disconnect the auger. The heavy duty powder coated steel construction of the HD99 uses a pivoting engine cradle that protects the engine and lets it stay level for proper oiling and longer life. The low profile and compact design of the frame eliminates the need for telescoping booms and axles and allows the unit to be transported in the bed of a small truck. The HD99 also comes equipped with a towbar with a 2" hitch coupler and safety chains for surface street and jobsite transport. The hydraulic system used on the HD99 is extremely reliable and requires very little maintenance compared to mechanical systems, and the HD99 uses high quality Parker components. All the maintenance that is usually required is to check or change the hydraulic fluid and engine oil and replace the hydraulic filter. The uniquely shaped fluid reservoir holds 3 gallons of fluid while having a large amount of surface area to dissipate heat for higher efficiency. The reservoir has a dipstick for checking the fluid level and the drain plugs for the hydraulic fluid and engine oil, as well as the hydraulic filter, are easy to access and use without making a mess. The Ground Hog HD99 is a powerful, well designed earthdrill you can rely on. Please contact us for current pricing and availability.
-
Discs 6-7/8xNH E-Z Edger Floor Sanding Discs General Purpose 36-grit Please contact us for current pricing and availability.
-
Discs 6-7/8xNH E-Z Edger Floor Sanding Discs General Purpose 60-grit Please contact us for current pricing and availability.
-
Lawn RollerLawn Roller 24" and 36" long drum filled with water for weight to gain compaction
Please contact us for current pricing and availability.
-
Discs 6-7/8xNH E-Z Edger Floor Sanding Discs General Purpose 80-grit Please contact us for current pricing and availability.
-
Electric Threader from 1/4" NPT - 1-1/2" NPTElectric Threader From 1/4" NPT - 1-1/2" NPT
Please contact us for current pricing and availability.
-
Discs 6-7/8xNH E-Z Edger Floor Sanding Discs General Purpose 100-grit Please contact us for current pricing and availability.
-
Discs General Purpose Floor Sanding 7 x 7/8 16-grit Please contact us for current pricing and availability.
-
Car Jack StandCar Jack Stand from 2 ton - 5 ton
Please contact us for current pricing and availability.
-
Discs General Purpose Floor Sanding 7 x 7/8 20-grit Please contact us for current pricing and availability.
-
Ridgid Pony 700 Threader Ridgid Pony 700 Pipe Threader 1/4" NPT - 2" NPT Electric Pipe Threader. Please contact us for current pricing and availability.
-
Discs General Purpose Floor Sanding 7 x 7/8 36-grit Please contact us for current pricing and availability.
-
National Pipe thread Die HeadNPT die heads from 1/4" NPT - 2" NPT die heads
Please contact us for current pricing and availability.
-
Discs General Purpose Floor Sanding 7 x 7/8 60-grit Please contact us for current pricing and availability.
-
framing nailer Duo-fast framing nailer for 21 degree framing nails Please contact us for current pricing and availability.
-
Discs General Purpose Floor Sanding 7 x 7/8 80-grit Please contact us for current pricing and availability.
-
Discs General Purpose Floor Sanding 7 x 7/8 100-grit Please contact us for current pricing and availability.
-
Discs General Purpose Floor Sanding 17 x 2 16-grit Please contact us for current pricing and availability.
-
Discs General Purpose Floor Sanding 17 x 2 20-grit Please contact us for current pricing and availability.
-
Pole prunner has a 12" blade and is 8' in lenght
Please contact us for current pricing and availability.
-
Simplex Aluminum 10 ton railroad jack has 20" stroke for lifting houses, sheds, machinery and has pickup point at 2" and 24 " Please contact us for current pricing and availability.
-
Discs General Purpose Floor Sanding 17 x 2 36-grit Please contact us for current pricing and availability.
-
28" wide x 5' high x 7' long Please contact us for current pricing and availability.
-
Discs General Purpose Floor Sanding 17 x 2 60-grit Please contact us for current pricing and availability.
-
scaffolding is 5' wide x 6' high x 7' long Please contact us for current pricing and availability.
-
Discs General Purpose Floor Sanding 17 x 2 80-grit Please contact us for current pricing and availability.