-
4/0 x 50' welding lead extension Please contact us for current pricing and availability.
-
Designed for the compaction of asphalt as well as granular and mixed materials with some cohesive content in confined areas such as parking lots, highway and bridge construction, next to structures, curbs and abutments. Large capacity polyethylene water tank located within the front lift cage for protection and is semi-transparent for easy check of the water level. Large in-tank water filter • Operating weight 203 lbs. • Plate width 19.5" • 5.5 HP • Centrifugal force 3375 lbs. • Frequency 6000 VPM • Speed 100 ft/min • Ft²/h 9750 Please contact us for current pricing and availability.
-
Sheets QuickSand 12 x 18 80-grit Please contact us for current pricing and availability.
-
Sheets QuickSand 12 x 18 60-grit Please contact us for current pricing and availability.
-
Sheets QuickSand 12 x 18 36-grit Please contact us for current pricing and availability.
-
Sheets QuickSand 12 x 18 20-grit Please contact us for current pricing and availability.
-
Sheets QuickSand 12 x 18 100-grit Please contact us for current pricing and availability.
-
Sheets General Purpose VA8 Clarke 8x19-1/2 80-grit Please contact us for current pricing and availability.
-
Sheets General Purpose VA8 Clarke 8x19-1/2 60-grit Please contact us for current pricing and availability.
-
Sheets General Purpose VA8 Clarke 8x19-1/2 36-grit Please contact us for current pricing and availability.
-
Sheets General Purpose VA8 Clarke 8x19-1/2 16-grit Please contact us for current pricing and availability.
-
Sheets General Purpose VA8 Clarke 8x19-1/2 12-grit Please contact us for current pricing and availability.
-
Sheets General Purpose VA8 Clarke 8x19-1/2 100-grit Please contact us for current pricing and availability.
-
Sheet Abrasive Mesh Screen 12 x 18 80-grit Please contact us for current pricing and availability.
-
Sheet Abrasive Mesh Screen 12 x 18 150-grit Please contact us for current pricing and availability.
-
Sheet Abrasive Mesh Screen 12 x 18 100-grit Please contact us for current pricing and availability.
-
Pads White Polish 17x1 Please contact us for current pricing and availability.
-
Pads White Polish 13 x 1 Please contact us for current pricing and availability.
-
Pads White Polish 12x18x1 Please contact us for current pricing and availability.
-
Pads Red Buffer 17 x 1 Please contact us for current pricing and availability.
-
Pads Green Scrubber 12x18x1 Please contact us for current pricing and availability.
-
Pads Green Scrub 17x1 Please contact us for current pricing and availability.
-
Pads Green Scrub 13x1 Please contact us for current pricing and availability.
-
Pads Black Stripper 17 x 1 Please contact us for current pricing and availability.
-
Pads Black Stripper 12x18x1 Please contact us for current pricing and availability.
-
Griding blocks used with our gasoline powered concrete grinder. Comes in a variety of grits. Please contact us for current pricing and availability.
-
Discs General Purpose Floor Sanding 7 x 7/8 80-grit Please contact us for current pricing and availability.
-
Discs General Purpose Floor Sanding 7 x 7/8 60-grit Please contact us for current pricing and availability.
-
Discs General Purpose Floor Sanding 7 x 7/8 36-grit Please contact us for current pricing and availability.
-
Discs General Purpose Floor Sanding 7 x 7/8 20-grit Please contact us for current pricing and availability.
-
Discs General Purpose Floor Sanding 7 x 7/8 16-grit Please contact us for current pricing and availability.
-
Discs General Purpose Floor Sanding 7 x 7/8 100-grit Please contact us for current pricing and availability.
-
Discs General Purpose Floor Sanding 17 x 2 80-grit Please contact us for current pricing and availability.
-
Discs General Purpose Floor Sanding 17 x 2 60-grit Please contact us for current pricing and availability.
-
Discs General Purpose Floor Sanding 17 x 2 36-grit Please contact us for current pricing and availability.
-
Discs General Purpose Floor Sanding 17 x 2 20-grit Please contact us for current pricing and availability.
-
Discs General Purpose Floor Sanding 17 x 2 16-grit Please contact us for current pricing and availability.
-
Discs General Purpose Floor Sanding 17 x 2 100-grit Please contact us for current pricing and availability.
-
Discs Abrasive Mesh Screen 17 60-grit Please contact us for current pricing and availability.
-
Discs Abrasive Mesh Screen 17 150-grit Please contact us for current pricing and availability.
-
Discs Abrasive Mesh Screen 17 100-grit Please contact us for current pricing and availability.
-
Discs 6-7/8xNH E-Z Edger Floor Sanding Discs General Purpose 80-grit Please contact us for current pricing and availability.
-
Discs 6-7/8xNH E-Z Edger Floor Sanding Discs General Purpose 60-grit Please contact us for current pricing and availability.
-
Discs 6-7/8xNH E-Z Edger Floor Sanding Discs General Purpose 36-grit Please contact us for current pricing and availability.
-
Discs 6-7/8xNH E-Z Edger Floor Sanding Discs General Purpose 20-grit Please contact us for current pricing and availability.
-
Discs 6-7/8xNH E-Z Edger Floor Sanding Discs General Purpose 100-grit Please contact us for current pricing and availability.
-
Blocks Floor Grinding 2x2x4 10-grit Please contact us for current pricing and availability.
-
Blades 14 x 3/32 x 1 Abrasive Chop Saw Wheels-Metal Please contact us for current pricing and availability.
-
Blades 14 x 3/16 x 1D Abrasive Cut Off Wheels-Concrete Please contact us for current pricing and availability.
-
Blades 12 x 1/8 x 1 Abrasive Cut Off Wheels-Concrete Please contact us for current pricing and availability.
-
18" Vinyl Tile Cutter Please contact us for current pricing and availability.
-
Vibratorty Plate Vibratory Plate Packer Please contact us for current pricing and availability.
-
10'6" aluminum siding brake • Used by both professional and DIY customers to bend flat metal into profiles used in roofing and siding of residential and commercial construction • Mark I & II series brakes have a 14” throat depth and are capable of bending & hemming .019-.032 aluminum as well as 16 oz copper, 29 ga.-32 ga. steel • These brakes also work with any of our accessories and are a must for anyone working with aluminum, vinyl siding, and roofing Please contact us for current pricing and availability.
-
Premixed 2-cycle fuel. For use with handheld saws. TRUFUEL PREMIXED 50:1 FUEL Is precision-engineered with proprietary lubricants and advanced stabilizers to provide maximum protection to your 2-cycle engines. Unlike gas station gas, our premixed 2-stroke fuel is ethanol-free and formulated for hotter running, higher revving small engines. That means your outdoor power equipment will run smoother and stronger with fewer false starts. Don’t take chances, for premium performance, fill up with Trufuel.
Please contact us for current pricing and availability.
-
- Towable with 2" ball
- 34' platform height, 40' working height
- Length 14'9" , Width 4'11" , Height 6'3" (working width 11'8")
- Weight 3110 lbs
- 500 lbs basket limit
- up to 20' reach (see pic for diagram of machine limits)
Please contact us for current pricing and availability.
-
The TM34 is a robust and versatile trailer mounted cherry picker. It has retractable axles that allow it to pass through a 3ft 7in wide opening or doorway giving better access to applications As standard, the TM34 trailer mounted cherry picker comes with manual outriggers which are cost effective and simple to setup, but there is also a hydraulic outrigger option to help save time and energy when setting up. Operation is quick, easy and precise due to reliable fully proportional controls and its versatile battery power pack enables the TM34 trailer mounted cherry picker to work inside and out quietly and with zero emissions. The TM34 trailer mounted cherry picker is a fast, cost effective and safe alternative to ladders and scaffolds. See More in this video below: Please contact us for current pricing and availability.
-
RentSpray 500 HR paint sprayer. used for painting latex and enamel paint(.54GPM, .023 max tip size, 3300psi, 54lbs, 7/8HP motor) COMES COMPLETE WITH LX80 PLATINUM GUN, 1/4"X50' HOSE AND 517 REVERSIBLE TIP
Please contact us for current pricing and availability.
-
3/8" x 50' HoseUrethane cover is bonded to an inner nylon braid making it highly flexible & kink resistant. Conductive tube design for proper grounding. Durable abrasion resistant urethane cover resists wear
Please contact us for current pricing and availability.
-
4" x 20' Rubber Suction Hose with Foot Valve Please contact us for current pricing and availability.
-
Stomper XH670 lightweight rammer with an impact force of 2650 lbs. Lightweight, smooth running and easy to operate Stone Stompers deliver maximum impact force, superior handling, control and reliability. Ideal for compaction of small trenches, utility and piping work, along abatements and walls. * Powered by Honda GX100 with a float carburetor * Shoe size 10" x 13" * Impact force 2650 lbs. * Max. blows/min 727. * Specially-designed carburetor for the 4-cycle models allows the Stomper to be laid down and picked up and keep on running. * Select from either a float or diaphragm carburetor depending on operating preference. * Precision components including forged pistons and solid snubbers provide extra reliability and durability. * Exclusive modular design cuts service time in half. * Quadruple fuel filtration system reduces job site fuel contamination for more run time and longer life. * Dual stage, top mounted air filtration system provides optimum air flow to reduce engine wear and extend life. * An innovative, snap-on contoured hood delivers a dynamic sound absorbing system. * Convenient lifting handles and optional wheels that attach to the handle provide easier mobility in or out of truck beds. Please contact us for current pricing and availability.
-
Drop Hammer attachment for Bobcat Skid Loaders. The Cyclone Drop Hammer was developed specifically for the demolition and recycling industries to break-up or crack concrete slabs.
Please contact us for current pricing and availability.
-
- Stainless steel
- 6" long x 3" wide edger
Please contact us for current pricing and availability.
-
18 Gallon wet/dry shop vac Please contact us for current pricing and availability.
-
A liquid caustic cleaner emulsification, wetting and penetration are incorporated in this product. The best for steam cleaning heavy equipment and scrubbing industrial plant floors. USDA approved.
Please contact us for current pricing and availability.
-
Shindiawa Weed Eater Please contact us for current pricing and availability.
-
Pole prunner has a 12" blade and is 8' in lenght
Please contact us for current pricing and availability.
-
High performance and powerful, the 490 is ideal for commercial and farm use. Features include inertia chain brake and all-in-one control lever.Boot-mounted Walbro WT carburetor delivers excellent acceleration from clutch engagement through full throttle and reduces heat transfer from the engine. 1-piece CDI ignition system for quick, easy starts. RPM limiter protects engine from overspeeding. Large clam-style air filter provides superb air-filtration and long service life. Meets stringent EPA and California exhaust emission regulations.
Please contact us for current pricing and availability.
-
General purpose water suction hose for contractors, industrial, and agricultural service. Black smooth EPDM blend rubber tube, fabric plies, and steel wire spiral for full vacuum service. Temperature range: -10°F to 180°F. W/P 125# Please contact us for current pricing and availability.
-
General purpose water suction hose for contractors, industrial, and agricultural service. Black smooth EPDM blend rubber tube, fabric plies, and steel wire spiral for full vacuum service. Temperature range: -10°F to 180°F. W/P 125# Please contact us for current pricing and availability.
-
The new CTS12 Gen 2 RIP-R-STRIPPER® is highly productive for removing ceramic tile, hardwood flooring and other materials from cement surfaces. Breaks through today’s high bond strength mastics, glues and thinsets for both commercial and DIY projects.
Please contact us for current pricing and availability.
-
Quickly remove VCT tiles, rubber-backed carpeting and sheet type coverings from wood and concrete surfaces. Adjust blade attack angle on-the-fly using the Back-Saver™ Blade Control System for maximum productivity. The exclusive blade clamping system prevents unwanted floor material under clamp build ups further improving long term maintenance costs. Welded, unitized frame. Centralized bearing lubrication system. Adjustable operator handle with quick release feature folds for easy transport.
Please contact us for current pricing and availability.
-
Tri-Pod chain lock pipe vice up to 4" pipe
Please contact us for current pricing and availability.
-
4"-6" Pipe Cutter, Heavy Duty 6-S Extra-long shank protects adjustment threads, while an extra-large handle is provided for quick, easy adjustment Please contact us for current pricing and availability.
-
2"-4" Pipe Cutter, Heavy-Duty 4-S Second handle?on 3-S, 4-S and 6-S makes two-man leverage possible on large pipe sizes Please contact us for current pricing and availability.
-
Ridgid Pony 700 Threader Ridgid Pony 700 Pipe Threader 1/4" NPT - 2" NPT Electric Pipe Threader. Please contact us for current pricing and availability.
-
Electric Threader from 1/4" NPT - 1-1/2" NPTElectric Threader From 1/4" NPT - 1-1/2" NPT
Please contact us for current pricing and availability.
-
National Pipe thread Die HeadNPT die heads from 1/4" NPT - 2" NPT die heads
Please contact us for current pricing and availability.
-
Manual Pipe Threader 1/4" NPT - 2" NPT Threads. Please contact us for current pricing and availability.
-
Ridgid Cutter/Threader Ridgid 535 Pipe Threader from 1/4" NPT to 2" NPT Please contact us for current pricing and availability.
-
Powder Actuated Nail Gun for shooting nails into concrete. Please contact us for current pricing and availability.
-
Simplex Aluminum 10 ton railroad jack has 20" stroke for lifting houses, sheds, machinery and has pickup point at 2" and 24 " Please contact us for current pricing and availability.
-
2" PowerNailer Hardwood Flooring Cleats 16 gauge, 1000 nails. 1/2" to 33/32" tongue & groove hardwood flooring cleats for use with the 445 PowerNailer.
Please contact us for current pricing and availability.
-
Powernail 16 Gauge Hardwood Flooring Cleats 1/2" to 33/32" tongue & groove hardwood flooring cleats for use with the 445 PowerNailer.
Please contact us for current pricing and availability.
-
The 421 Portamatic Pneumatic Floor Nailer is the most innovative and versatile air flooring tool on the market today.. The tool comes ready to nail 3/4 In. flooring and accessory pads and shoes, sold separately, allow for quick changes to handle 9/16, 33/32 In., Bamboo and 18mm Flooring. One tap with the mallet and your nail is set, tight and in the right spot! This is the only tool in the industry that allows you to add an accessory shoe to convert for Face Nailing and also includes a sturdy carrying case to protect your investment. Our blind nailing shoe is designed to protect the top surface of your floor and our oil-less operating system ensures no oil drops or stains from oil. A quick access gate and clip system allows you to clear a jam. The nail’s wide head and grapple barb design provides superior holding power! The 421 requires only the lightest tap to actuate and set the nail. The nailer is perfectly balanced as the tool rest on both the sub floor and the wood floor Magazine With Steel Track Insert for Long Life Please contact us for current pricing and availability.
-
The Model 445 is a pneumatic Powernailer® which uses 16 gage cleats for the installation of Tongue & Groove hardwood flooring. Only available at our Thibodaux location.
- The Model 445 is recommended for use on 5/8", 3/4" and 33/32" flooring.
- The standard configuration is a Long Handle with a Short Channel (L/S).
- Nailer package includes a choice of Black or White 3mi Mallet, lube oil, 2 box wrenches, 2 Allen wrenches, extra driving blade, 3/4" & 5/8" adapter pads and 2 shims.
- Requires a 70 to 110 psi air compressor.
- Specify handle and channel length (L/L, S/L, S/S, XL/L & XL/S) when ordering—no additional charge.
- Short Channel holds 100 Powercleats, Long Channel holds 200. Optional Pad for 1/2" flooring available.
Please contact us for current pricing and availability.
-
Outback® Brush Cutter cuts a clear path through the densest brush, grass and weeds over 8 feet tall, saplings up to 1.5 inches in diameter and other problem vegetation at the rate of 2/3 acre per hour. Powered by a 12.5 HP B&S Intek IC engine.
Please contact us for current pricing and availability.
-
One Man Auger Drill 4", 6" and 8" holes 36" deep. Please contact us for current pricing and availability.
-
Whether you're a contractor or do-it-yourselfer, this air compressor will suit your needs.
Please contact us for current pricing and availability.
-
Comes with 7ft. shaft. When concrete consolidation is required for remote or mobile applica-tions, there's nothing like a Northrock Backpack Vibrator System. These units are designed for use where electrical power is not conveniently available or for applications where extra mobility is desired. No tangled air hoses or electrical extension cords.Northrock Backpack Vibrators offer just the right 10,000 vpm mid-frequency and force characteristics required to set material particles in motion quickly for rapid consolida-tion of homogenous mixes without destroying important freeze-thaw pressure-relief chains produced by small air bubbles. Northrock concrete vibrators are designed to maintain these optimum frequencies regardless of slump, head diameter or other load conditions.
Please contact us for current pricing and availability.
-
Dry areas quickly with this compact, three-speed blower. Quickly dry carpet, hard floors, fresh paint, concrete sealer and much more. Ensure durability and many years of use with this blower's rotationally-molded body Blower - Three-speed Air Mover 1/2 Horsepower, Three speeds, Stackable, Rotomolded durability. ETL US/C Please contact us for current pricing and availability.
-
Electric floor scrapper for removing floor covering and carpet. The accelerated rpm orbital cutting action provides an efficient and operator friendly work environment. Ideal for light commercial, residential and DIY markets the 550 removes most light weight floor coverings to include carpet, glues & adhesives, VCT and residential grade ceramics (utilizing the patented 552 carbide tip cutting shank - included). The adjustable AOA (Angle of Approach) allows the 550 to work efficiency on wood substrates as well as concrete. Please contact us for current pricing and availability.
-
Multiquip concrete mixer towable, The ultimate in heavy duty mixers, ideal for mixing large aggregrate 9 cubic foot capacity, Poly Drum, Honda 7.9 HP model GX-240. Weight 810 Lbs Please contact us for current pricing and availability.
-
Description Deep Cut Band Saw w/Case. blades not included • Industry Leading 10.5 Amp Motor - delvers the most power for all applications. • 0-420 SFPM - Up to 40% faster cuts. • 4-7/8" Cutting Capacity - deep cut capacity for various materials. • Updated Main Handle Design - optimized for balance and control. • Variable Speed Dial & Trigger - adjusts the speed for different materials. • Multi-Grip T-Handle -provides multiple grip options for increased control in any application. • Updated Blade Bearing Design - improved durability with 8 large ball bearings. • Adjustable Material Guide - durable steel guide that is adjustable for different materials. • 2-Finger Variable Speed Trigger - ability to start the cut slowly for accuracy Please contact us for current pricing and availability.
-
15A Super Sawzall • 15.0 Amp Milwaukee Motor - highest overload protection in the industry; prevents motor burn up / failure. • Constant Power Technology™ - maintains constant speed under load for unmatched cutting performance. • Patented Gear Protecting Clutch - extends gear and motor life by absorbing high impact forces caused by sudden blade lock-ups. • Patented Counter Balanced Mechanism - smoothest running, lowest vibrating reciprocating saw in the industry. • Variable Speed Trigger and Dial Speed Control - maximum speed control. • Quik-Lok™ Blade Clamp System - provides fast and easy blade changes Please contact us for current pricing and availability.
-
16 CF Ride On Concrete Power Buggy Poly Bucket Recoil Start 13HP Honda & Foam FilledTires Please contact us for current pricing and availability.
-
250 amp Welder/10KW Generator
Please contact us for current pricing and availability.
-
Welder/Generator
Please contact us for current pricing and availability.
-
13.1 CFM @ 100 PSI, Wheelbarrow Compressor, 8 Gallon Storage Capacity, 196cc Honda GX200 OHV With Low Oil Shut Down, Stainless Discharge Hose • 196cc Honda GX200 OHV With Low Oil Shut Down • 13.1 CFM @ 100 PSI, Wheelbarrow Compressor • 8 Gallon Storage Capacity • Stainless Discharge Hose Please contact us for current pricing and availability.
-
Meterman Measuring Wheel Please contact us for current pricing and availability.
-
Mix, Till, and Dig with Maxim's Commercial Compact Tiller. With Maxim's smallest serviceable roller chain and sprocket transmission, the tines (approximately 150 rpm) can really throw dirt. The commercial compact boasts these great features: Braced, 14 gauge, seamless tubular steel handles, 13" and 19" tilling width, 11" Bolo tines with bolt on blades, and lift handle/engine guard Please contact us for current pricing and availability.